Gen L Upgrades:
Jaret developed the first bino pack 50 years ago while guiding in Alaska. While we strongly believe that if it’s not broke, don’t fix it, we also believe that through continuing innovation we can improve our designs to better suit the needs of our customers.
Upgrades include the addition of 3 molle straps on the bottom of the pack, the Gen L Harness, and the Pro Tethers.
Gen L Harness – The Gen L (Celebrating 50 years of innovation) Harness is a slim, padded harness that allows the user to completely contain excess webbing within the shoulder straps to eliminate dangling webbing and provide a clean, comfortable finish.
Pro Tethers – The Pro Tethers connect directly to the Gen L Harness at the grommet located at the point of the shoulder straps. They also connect easily to other AGC Harnesses through the slot on the male buckle or 3 bar slider. The Pro Tethers are 3/8” elastic webbing that secure and protect optics in the event of a drop, but also allow for them to be easily detached when required. To attach and detach the optic from the tether, simply rotate the custom tether clip 90 degrees and slide the tether loop through the slot of the clip. The black micro cord loop/tether clip can then be attached through the attachment location of the optic by slipping the micro cord through the optic attachment point then back over the tether clip. Reattach the tether clip to the 3/8” tether loop in the same fashion you removed it.
Each Gen L Kodiak Cub Max comes complete with the matching Gen L Harness and a set of the all new Pro Tethers attached.
*** Harness, Binocular Tether System, & Auto-Locking Buckles are included with each pack ***
The Hybrid is the perfect combination of the rangefinder pocket of the Kodiak Cub and the mesh sides of the KISS. These are meant to accommodate binoculars up to around 42mm objective lenses. For example, most 8×42 and 10×42 binoculars would fit perfect in the compact harnesses. (Main Compartment measurements are approximately 6.5 inch tall x 6 inch wide x 3 inch deep. Front Compartment measurements for the Hybrid are approximately 4 inch tall x 6 inch wide x 1.5 inch deep. Side mesh pockets are 3 inches tall X 2.25 inches wide x 1 inch deep. Rear Compartment measurements are 4 inch tall x 6 inch wide “flat”) H.B.S (Hook and Bungee System) closure allows for quiet, easy one hand operation to open and secure the main compartment.
Perfect for: Swarovski, Leica, Zeiss, Vortex, 8×32, 8×42, 10×32, 10×42
